User Tools

Site Tools


hardware

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
hardware [2011/07/29 19:18]
mh [Misc]
hardware [2013/02/10 23:51] (current)
trapicki [CPU] updated LPC1343 Datasheet and Manual links
Line 1: Line 1:
 +== Hardware ==
 +
 +=== Intro ===
 +
 +We want to encourage you to tinker with your r0ket. Write your own software or build a pluggable hardware [[m0dul]]. Surprise with your creative ideas!
 +
 +Several people contacted us about producing r0kets for other occasions. All necessary information is on github and we're happy to help. But you should plan ahead at least 2 months!
 +
 +
 ====== Schematic ====== ====== Schematic ======
 {{:​r0ket.sch.png?​direct&​400|}} {{:​r0ket.sch.png?​direct&​400|}}
Line 9: Line 18:
 Description:​ 32-bit ARM Cortex-M3 microcontroller with 32KB flash, 8KB SRAM, USB Device Description:​ 32-bit ARM Cortex-M3 microcontroller with 32KB flash, 8KB SRAM, USB Device
  
-Links: [[http://​ics.nxp.com/​products/​lpc1000/​all/​~LPC1343/​|Vendor]] [[http://ics.nxp.com/products/lpc1000/datasheet/​lpc1311.lpc1313.lpc1342.lpc1343.pdf|Datasheet]] [[http://ics.nxp.com/support/documents/microcontrollers/pdf/​user.manual.lpc13xx.pdf|Manual]]+Links: [[http://​ics.nxp.com/​products/​lpc1000/​all/​~LPC1343/​|Vendor]] [[http://www.nxp.com/documents/data_sheet/LPC1311_13_42_43.pdf|Datasheet]] [[http://www.nxp.com/​documents/​user_manual/UM10375.pdf|Manual]]
  
 ====== LCD ====== ====== LCD ======
 +
 +r0ket v1 and v2 come with a black and white display:
 +
 Name: Nokia 1200 Name: Nokia 1200
  
 Description:​ Nokia 1200 - 96x68 (green) monochrome LCD Description:​ Nokia 1200 - 96x68 (green) monochrome LCD
  
-Pin compatibleNokia 1600 98x70 4096 color LCD+ControllerPhillips PCF8814 [[http://​mylcd.sourceforge.net/​files/​pcf8814.pdf|Datasheet]] 
 + 
 +Connector: Hirose DF23-10DS [[http://​www.sparkfun.com/​datasheets/​LCD/​Hirose-DF23.pdf|Datasheet]]
  
 Video: [[http://​www.youtube.com/​watch?​v=GZlOOvKoToE|Nokia displays]] Video: [[http://​www.youtube.com/​watch?​v=GZlOOvKoToE|Nokia displays]]
 +
 +The Nokia 1600 - 98x70 4096 color LCD is pin compatible.
 +Software to use this display with r0ket exists - see [[colordisplay]] for more.
  
 ====== RF ====== ====== RF ======
-Name: nRF24L01+Name: nRF24L01+
  
 Description:​ Single Chip 2.4GHz Transceiver with an embedded baseband protocol engine. ISM frequency band at 2.400 - 2.4835GHz Description:​ Single Chip 2.4GHz Transceiver with an embedded baseband protocol engine. ISM frequency band at 2.400 - 2.4835GHz
  
-Links: [[http://​www.nordicsemi.com/​eng/​Products/​2.4GHz-RF/​nRF24L01|Vendor]] [[http://​www.nordicsemi.com/​eng/​content/​download/​2730/34105/file/nRF24L01_Product_Specification_v2_0.pdf|Datasheet]]+Links: [[http://​www.nordicsemi.com/​kor/​Products/​2.4GHz-RF/​nRF24L01P|Vendor]] [[http://​www.nordicsemi.com/​kor/​content/​download/​2726/34069/file/nRF24L01P_Product_Specification_1_0.pdf|Datasheet]] 
 + 
 +===== Antenna ===== 
 +its 50 ohms, so you can easily extend it by e.g. a cantenna
  
 +Links: [[ http://​www.johansontechnology.com/​images/​stories/​ip/​rf-antennas/​Antenna_2450AT42A100_08-29-2008.pdf | Datasheet]]
 ====== Battery ====== ====== Battery ======
 Description:​ Custom made 3.7V 600mAh rechargeable LiPo battery Description:​ Custom made 3.7V 600mAh rechargeable LiPo battery
Line 46: Line 67:
 {{:​r0ket-m0dulbus.png?​400&​direct|}} {{:​r0ket-m0dulbus.png?​400&​direct|}}
  
-^ Pin ^ Description ^ +m0dulA 
-+3V3_EXP | Fixed 3.3V | + 
-VCC | Battery voltage (4.5-3.5V) | +^Pin^Name^Description^ 
-GND Ground ​|  +|1 |3V3_EXP| Fixed 3.3V| 
-SCLSDA | I2C bus +|2 |MISO   | SPI: Master in, Slave out| 
-MISO, MOSI, SCK | SPI bus +|3 |MOSI   | SPI: Master out, Slave in| 
-SSx | Chip select for SPI or general purpose IO | +|4 |SCK    | SPI: Clock| 
-| BUSINT | Active LOW open-drain interrupt ​ |+|5 |GND    | Ground| 
 +|6 |SS0    | Chip select for SPI or general purpose IO RB_SPI_SS0 = PIO2_5| 
 +|7 |SDA    | I2C: Data| 
 +|8 |SS1    | CS for SPI or general purpose IO RB_SPI_SS1 = PIO2_4| 
 +|9 |SCL    | I2C: Clock| 
 +|10|SS2 ​   | CS for SPI or general purpose IO RB_SPI_SS0 = PIO2_8| 
 +|11|BUSINT | Active LOW open-drain interrupt | 
 +|12|VCC_EXP| Battery voltage (4.5-3.5V) | 
 + 
 +m0dulB 
 +^Pin^Name^Description^ 
 +||3V3_EXP| Fixed 3.3V
 +|2 |MISO   | SPI: Master inSlave out
 +|3 |MOSI   | SPI: Master outSlave in| 
 +|4 |SCK    | SPI: Clock
 +|5 |GND    | Ground| 
 +|6 |SS3    ​| Chip select for SPI or general purpose IO RB_SPI_SS3 = PIO3_2
 +|7 |SDA    | I2C: Data| 
 +|8 |SS4    | CS for SPI or general purpose IO RB_SPI_SS4 = PIO3_1| 
 +|9 |SCL    | I2C: Clock| 
 +|10|SS5 ​   | CS for SPI or general purpose IO RB_SPI_SS5 = PIO2_10| 
 +|11|BUSINT | Active LOW open-drain interrupt ​
 +|12|VCC_EXP| Battery voltage (4.5-3.5V) ​|
  
 ===== Hackerbus ===== ===== Hackerbus =====
Line 63: Line 106:
 {{:​r0ket-hackerbus.png?​200&​direct|}} {{:​r0ket-hackerbus.png?​200&​direct|}}
  
-^ Pin ^ Description ^ +Hackbus HB1 
-| +3V3_EXP | Fixed 3.3V | +^Pin^Name^Description^ 
-VCC | Battery ​voltage (4.5-3.5V) +|1|+3V3_EXP| Fixed 3.3V| 
-| GND | Ground |  +|2|GND|Ground| 
-HBx General purpose IO |+|3|VCC_EXP|Battery ​Voltage| 
 +|4|HB3|PIO0_2/​SSEL/​CT16B0_CAP0| 
 +|5|HB4|PIO1_4/​AD5/​CT32B1_MAT3/​WAKEUP //pulled up to +3V3 to enable deep power-down, not usable as ADC//| 
 +|6|HB5|PIO1_2/​AD3/​CT32B1_MAT1/​TRST| 
 + 
 + 
 +Hackerbus HB2 
 +^Pin^Name^Description^ 
 +|1|+3V3_EXP| Fixed 3.3V
 +|2|GND|Ground| 
 +|3|VCC_EXP|Battery Voltage| 
 +|4|HB0|PIO1_3/​AD4/​CT32B1_MAT2/​SWDIO| 
 +|5|HB1|PIO0_10/​SCK/​CT16B0_MAT2/​SWCLK| 
 +|6|HB2|PIO1_1/​AD2/​CT32B1_MAT0/​TDO|
  
 ====== micro SD slot ====== ====== micro SD slot ======
Line 74: Line 130:
  
 from: [[http://​www.sparkfun.com/​products/​127|Sparkfun]](item nr. PRT-00127) or [[http://​www.csd-electronics.de| csd-electronics]] (item. nr. 020-TFH1, [[http://​i.imgur.com/​GzkFe.jpg|datasheet]]) from: [[http://​www.sparkfun.com/​products/​127|Sparkfun]](item nr. PRT-00127) or [[http://​www.csd-electronics.de| csd-electronics]] (item. nr. 020-TFH1, [[http://​i.imgur.com/​GzkFe.jpg|datasheet]])
 +
 +====== LEDs ======
 +^LED ^ Port^ Location ^ Color^
 +|RB_LED0|PIO0_11|bottom left|green|
 +|RB_LED1|PIO1_7|top left|green|
 +|RB_LED2|PIO1_6|bottom right|green|
 +|RB_LED3|PIO1_11|top right|red|
 +
 ====== Misc ====== ====== Misc ======
  
Line 81: Line 145:
  
 Micro USB (2.0) socket Micro USB (2.0) socket
 +
 +=== Further reading ===
 +
 +  * Documentation on [[m0dul]] development
 +  * Show your Hardware [[hardware-mods|modifications]]
 +
hardware.1311959886.txt.gz · Last modified: 2011/07/29 19:18 by mh