Differences

This shows you the differences between two versions of the page.

--- backup_firmware [2011/08/10 13:16] – ikarus
+++ backup_firmware [2011/08/10 13:31] (current) – ikarus
@@ Line 1: / Line 1: @@
-====== Backup usb_storage ======
+{{Delete|Backup has nothing to do with firmware i think... just usb_storage}}
-This will help you to backup your own r0ket memory and restore it. For example if your r0kets data flash is corrupted.
-===== Backup old usb_storage =====
-  * Connect your r0ket via USB.
-  * Select the usb_storage mode from the r0ket menu.
-  * Unmount the r0ket storage (e.g. Ubuntu automounts storage devices)
-  * Run:
-    <code>sudo dd if=/dev/sdX of=r0ket_backup.dat</code> (Replace X with the fitting device letter for your system)
-You now have a backup from your r0ket.
-===== Restore usb_storage =====
-  * Connect your r0ket via USB.
-  * Select the usb_storage mode from the r0ket menu.
-  * Unmount the r0ket storage (e.g. Ubuntu automounts storage devices)
-  * Run:
-    <code>sudo dd of=/dev/sdX if=r0ket_backup.dat</code> (Replace X with the fitting device letter for your system)
-  * Reboot your r0ket.
-===== Restore original usb_storage using a friends backup =====
-  * Backup (if possible) your priv.key, pubx.key and puby.key file.
-  * Do the same as seen in the "Restore original firmware" section.
-  * Replace the priv.key, pubx.key and puby.key with your backuped files.
-I experienced a MAC problem with the SENDCARD l0dable. I fixed it by simply
-downloading the SENDCARD l0dable from [[l0dable|here]] and replaceing it with that on the r0ket.